The only wear-free machine in its class.
More precise than any other in its category. Aesthetic appeal that is unmatched.
Limitless TAURUS universe
Variety, flexibility and precision combined in a unique technology from WALDRICH COBURG!
At the center of our TAURUS universe are the many possibilities that our TAURUS & TAURUS Gemini already offer today. But we are still setting new standards by redefining the dimensions of flexibility, versatility, and productivity in the machining of workpieces. With the TAURUS universe, we proudly present the development of our machines that will revolutionize your manufacturing world — sustainably.
Our TAURUS has been known and used for many years for its impressive performance and precision. But now we are going one step further, because our engineering expertise has enabled us to expand the scope for creativity and innovation once again.
Suitable for all workpieces
TAURUS — the ideal machining center for the following applications:
steel construction
- frames
- fixtures
machine tool components
- gearboxes
- pump housings
- machine beds
mobility
- Tooling
- die components
- engine blocks
Information for free download
Technical data
Minimal operating costs thanks to energy-efficient design.
Increased productivity through short non-productive times and optimum ergonomics. Low hourly rates with the highest performance result in the best price-milling ratio.
You are currently viewing a placeholder content from YouTube. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More Information- Clearance height [mm] 1.000 — 3.500
- Clearance width [mm] 3.000 — 4.500
- Table lenght [mm] 3.000 — 10.000
- Table width [mm] 2.000 — 3.500
- Max. Table load Up to 92 t (depending on table size and drive)
- Max. Feed 30 m/min in X 40 m/min in Y / Z 30 m/min in X 40 m/min in Y 37,5 m/min in Z
- Max. rapid traverse 30 m/min in X 40 m/min in Y / Z 30 m/min in X 40 m/min in Y 37,5 m/min in Z
- Acceleration 0,5 / 1,5 m/s² in X | 2 m/s² in Y/Z
Double benefit:
Our optional two-table or double-table design allows you, to set up in parallel for machining or to machine extremely long workpieces. Your productivity reaches new heights while remaining flexible.
Expand Dimensions
With additional table lengths, clearance widths and clearance heights, we give you the freedom to machine an even wider range of workpieces on our machines. There are no limits.
Contact us!
Just send us your contact details — we will get back to you.
General dimensions of the TAURUS
Machine size depends on the configuration
We build machines the right way
Portal
All frame components are made of high-quality gray cast iron with the best damping properties. The generously dimensioned wall thicknesses and the load-oriented ribbing guarantee outstanding rigidity. Both are the basis for performance in machining at very high precision.
Wear-free hydrostatic guides in the crossbeam, W‑axis and RAM guarantee trouble-free production.
Absolute position measuring systems and modern digital drives enable precise control.
Hydrostatic guideways
Simply cleverly done: all the advantages of hydrostatic guides, such as accuracy and milling behavior, are used and the energy balance is improved.
The excellent damping properties of the hydrostatics support the machining process, and the guides are highly accurate and wear-free. The temperature of the hydrostatic oil is tracked to the room temperature.
This maintains the high machine accuracy even with changing ambient temperatures. Separate energy-consuming temperature control equipment can be eliminated. The machine remains consistently accurate even in an adverse environment.
Power unit
State-of-the-art drive technology and absolute measuring systems enable energy-optimized operation with high precision and low maintenance. Energy recovery systems have been in use at WALDRICH COBURG for decades.
The space-optimized self-built gearbox of the X‑axis sits on the machine table. The high in-house production rate ensures a supply of spare parts even after 20 years.
The two feed motors of the X‑axis are water-cooled, thus preventing heat from entering the machine.
Strong
- Milling power 63 kW | 70 kW
- Robust cast design with hydrostatic guideways
- Perfect size / geometry ratio of the guideways
- Optimized drive concepts for best milling performance
- Flexible spindle unit concept for almost all applications
PRECISE
- No stick-slip effect due to frictionless guideways
- Readjustable at any time
- High temperature stability due to cast design and hydrostatics
- Smallest vibration curves due to high damping of the entire system
- Extremely high basic accuracy; therefore hardly any compensation required
WEAR-FREE
- No wear in the hydrostatic guideways
- High damping properties for lowest system load and for lowest tool wear
- Less sensitive in crash situations
- Proven WALDRICH COBURG technology in use
TAURUS at a glance
- Retrofit
- Repairs
- Spare parts
- Remote Service
- Maintenance
- Mechanical processing
- Technical customer consultant
- Trainings
- Machine transfer
Our solution in detail
US-HF‑1
- Spindle slide cross section [mm] 600 x 620
- Max. Milling Power [kW] 70
- Max. Torque [Nm] 300
- Max. RPM [min‑1] 30.000
- Max. Extension stroke [mm] 1.500 / 2.000
- C‑axis ± 300°
- Guideways Z‑axis Linear guideways
M4‑1
- Spindel slide cross section [mm] 400 x 400
- Max. Milling power [kW] 45
- Max. Torque [Nm] 1.250
- Max. RPM [min‑1] 6.000
- Max. Extension stroke [mm] 1.500
- C‑axis ± 200°
- Guideways Z‑axis Hydrostatic guideways
Spindle units on M4‑1
G150
- 40 kW (S6)
- 1.500 Nm (S6)
- 5.000 min-1
V15S
- 63 kW (S6)
- 1.500 Nm (S6)
- 6.000 min-1
H15S
- 63 kW (S6)
- 1.500 Nm (S6)
- 6.000 min-1
G15U
- 63 kW (S6)
- 1.500 Nm (S6)
- 5.000 min-1
V15L
- 63 kW (S6)
- 1.500 Nm (S6)
- 6.000 min-1
H07L
- 25 kW (S6)
- 700 Nm (S6)
- 2.500 min-1
UO-HF07
- 42 kW (S6)
- 70 Nm (S6)
- 20.000 min-1
G‑HF07
- 42 kW (S1)
- 70 Nm (S1)
- 20.000 min-1
V25H
- 63 kW (S6)
- 2.500 Nm (S6)
- 2.500 min-1
H25H
- 63 kW (S6)
- 2.500 Nm (S6)
- 2.500 min-1
Spindle units on US-HF‑1
UO-HF
N‑HF
- Technical data
- Application examples
- Power [kW]
- Max. RPM [min‑1]
- Max. Torque [Nm]
- Tool holder
- HF-Spindle 1
- Finishing of tools & molds
- 40
- 30.000
- 48
- HSK‑A 63
- HF-Spindle 2
- Finishing of steel & aluminum
- 55
- 24.000
- 108
- HSK‑A 63
- HF-Spindle 3
- Machining of GRP*
- 50
- 20.000
- 90
- HSK‑A 63
- HF-Spindle 4
- Prismatic roughing of aluminum
- 70
- 15.000
- 170
- HSK‑A 100
- HF-Spindle 5
- HPC from steel + aluminum roughing to semi-finish
- 50
- 10.000
- 300
- HSK‑A 100
For automatic replacement or permanent installation in the spindle units for the US-HF‑1
Contact us!
Just send us your contact details — we will get back to you.
Everything included!
Tool changer
With 100 tools in the basic configuration and the expansion option to 200 places, a high degree of flexibility is also achieved in the tool area. The very short tool change times reduce non-productive time to a minimum.
Processing unit changer
The machining units of the TAURUS are produced in Coburg. So the TAURUS can be adapted to your workpiece. In the automatic changing system, 4 storage places for processing units are available.
Coolant system
The coolant cleaning system is integrated on the supply platform. A compact belt filter system is used, which can be flexibly adapted to customer requirements. Here, too, we pay attention to low energy consumption and use frequency-controlled booster pumps for the internal and external coolant supply. By using a screw pump, the pressure of the internal coolant supply can be increased to 70 bar, as an alternative to the standard version.
Housing
Design und Function!
The TAURUS guarding system is more than just splash and chip protection. The operator‘s raised platform, the chip conveyors and the gratings next to the table are integrated into the guarding.
The operator has a good clear view of the machining process through the large windows next to the operating panel. The sliding door into the machine has a wide opening.
The large, but light hinged-doors at the front of the machine assist workpiece loading.
Highlights
Controls
According to requirements, TAURUS can be delivered with either a Heidenhain or Siemens control.
Thereby you can operate TAURUS using your familiar control systems.
ergonomic control panel
Working with TAURUS is great!
Because of the large display and the manufacturer’s original keyboard, operating TAURUS is a pleasure.
The whole control station can be swiveled and the angle of the keyboard can be adjusted.
With the optionally available video camera or InPro productivity package, a separate tablet and docking station with additional functions is also included for the operator’s use.
Energy box
The operator is pleased with the space-saving compact design. All supply units are located on the energy box.
Regenerative drive technology, wear-free guides and the combination of the supply units in the energy box facilitate operation and maintenance work. Combined with modern tools like InPro software, energy recovery drive technology, and wear free guildeways the end user will clearly realize lower operating costs.
Service
We offer a wide range of services related to our machines. Details
- Retrofit
- Repairs
- Spare parts
- Remote Service
- Maintenance
- Mechanical processing
- Technical customer consultant
- Trainings
- Machine transfer
DO YOU NEED MORE?
safety production package
This package includes a cleaning station for the tool flange and taper. In addition, tool breakage detection using a laser is included.
The use of tool breakage detection reduces tooling costs and enables unmanned production.
pallet changer
An optional pallet changer is available to allow part set-up in parallel with part machining. The fast double carrier reduces non-productive time. It only takes 3 minutes to exchange pallets. Extended chip conveyors keep the set-up area clean.
Fully enclosed guarding for the machine is included in the price of the pallet system.
Video camera
The dome-type video camera is located in the working area and allows the operator to view the far side of the workpiece.
The camera has swivel and zoom functions. The picture is shown on the InPro tablet.
InPro
InPro, the Interactive Production support allows ergonomic operation, increases the machine availability and contributes to machine safety. Maintenance personnel are assisted by a menu-guided system, the interactive diagnostics help for a speedy error search and the MDR gives information on machine use. Fixture sheets, NC program management etc. are connected to a modern network. WALDRICH COBURG has used this for more than 15 years and Teleservice for more than 30 years.
Do you need more?
Für mehr Informationen zu Ihren individuellen Möglichkeiten nehmen Sie Kontakt mit uns auf. Wir freuen uns auf Sie!
